Locate solutions for connect Canon Printer to WIFI here. Think about being able to print from several devices, such as tablets and smartphones, without having to connect them all to various connections. It’s practical, right? Unless you’re having difficulties connecting to Wi-Fi, you can accomplish all of that and move your device from room to room using a wireless printer.
Now we will see how to connect Canon printer to wifi (canon)?
1. Ensure that the printer is turned on and inside the Wi-Fi network’s coverage area.
2. On the touchscreen, press and hold the Home button before pressing and holding the Wi-Fi button.
3. Press OK after pressing the LAN Wireless setup button.
4. From the list, choose your Wi-Fi network, type your password, and then click OK.
5. Once you’re connected, the Power and Wi-Fi light will cease flashing.
So, for users who are wondering how to connect my Canon printer to wifi, follow the steps mentioned above to connect your Canon printer to wifi.
How to use WPS to link your canon printer to wifi?
Follow the following steps:
1. Ensure that the printer is turned on and inside the Wi-Fi network’s coverage area.
2. Tap WLAN on the touchscreen.
3. Next, select Start setup.
4. Within two minutes, hit OK on the printer after five seconds of pressing and holding the WPS button on your router.
5. Tap OK when the message “Connected to the access point” shows on your printer’s display.
How to connect canon pixma printer to wifi?
There are a few prerequisites that need to be completed before we can use the WPS push button method:
1. There must be a physical WPS push button present on the access point. Please consult the user manual for your device for further information. Use the steps in the Standard Connection Method if the WPS push button is not present.
2. WPA (Wi-Fi Protected Access) or WPA2 security protocol usage is required on your network. This protocol is used by most WPS-enabled access points.
Let’s start with the procedure:
1. Check to see if the printer is on.
2. Release the [Wi-Fi] button on top of the printer after holding it down until the white power lamp flashes once.
3. Within two minutes of the Wi-Fi button beginning to flash blue, go to your access point and push the [WPS] button.
4. Consult the access point documentation for precise instructions on how to push the WPS button.
The printer’s blue Wi-Fi lamp will continue to flash while trying to find or connect to the access point. The white power lamp will begin to flash as well during setup. The white and blue lamps will stop flashing once the printer has successfully connected to your wireless network and will stay on.
Network Configuration Confirmation.
You can print your printer’s network settings if you’d like to verify that it has successfully connected to your wireless network:
1. Check to see if your printer is on.
2. A4 or Letter-sized plain paper should be loaded.
3. Release the [Resume/Cancel] button after holding it down when the white power lamp flashes six times. It will print the network information page.
If you’re referring to the printout, make sure the “Connection” column says “Active” and the “SSID-Service Set Identifier” column says the right name of your wireless network.
The WPS setup process is now complete. So that’s how you can connect your canon pixma printer to wifi.
I hope you liked the above mentioned steps through which you can connect your Canon printer to wifi. If you have tried the above methods that we have given, we hope that they all become useful to you without any trouble.
List of other Canon Printer articles on this site
- Canon Printer showing offline Windows 10
- Canon Printer not showing up on network
- Connect Canon Printer to WIFI
